home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / mods_all.zip / TS440S.39 < prev    next >
Text File  |  1992-09-15  |  1KB  |  21 lines

  1.  
  2. ts440s.39
  3.  
  4. I then installed an 820 ohm fixed resistor in
  5. series with the cut loop.  I also put a very small dab of silicon seal
  6. between the new "hung" resistor and the ferrite transformer right next to
  7. it so that there would be no added strain on the remains of R27.  The
  8. alternative would be to remove the final unit completely and do the mod
  9. the right way, replacing the complete R27 with a 3k resistor.  This was
  10. a step that I didn't really want to perform on a two week old rig.  When
  11. you choose your series resistance, remember that the more resistance you
  12. add to it, the sooner the fan will turn on.  If you go too high, it will
  13. be on all the time.
  14.  
  15. This modification brings the fan on at least 10 deg. earlier. By the way,
  16. my only reservation about this mod is the added wear and tear on the fan
  17. unit itself.  I have been buying parts from Kenwood for about 10 years now
  18. and they have always seemed remarkably inexpensive.  Ordering a spare fan
  19. to have on hand seems like a very reasonable thing to do if you are worried
  20. about it.
  21.